- Hp Usb Composite Device Driver
- Hp Usb Drive Driver
- Hp V220w Usb Device Driver Download
- Hp Usb Device Driver Download
- Hp Usb Device Driver
- Hp Usb Device Drivers
Download the latest drivers, firmware, and software for your HP USB 3.0 3005pr Port Replicator.This is HP’s official website that will help automatically detect and download the correct drivers free of cost for your HP Computing and Printing products for Windows and Mac operating system. You can develop a custom host controller driver that communicates with the USB host controller extension (UCX) driver. For more information, see Developing Windows drivers for USB host controllers. For handling common function logic for USB devices. For more information, see USB device-side drivers in Windows. For supporting Type-C connectors. Download HP Wi-Fi device drivers or install DriverPack Solution software for driver scan and update. HP lt4114 LTE 4G USB Enumerator Device.
Starting with Windows 10, release 1703, a USB Audio 2.0 driver is shipped with Windows. It is designed to support the USB Audio 2.0 device class. The driver is a WaveRT audio port class miniport. For more information about the USB Audio 2.0 device class, see https://www.usb.org/documents?search=&type%5B0%5D=55&items_per_page=50.
The driver is named: usbaudio2.sys and the associated inf file is usbaudio2.inf.
The driver will identify in device manager as 'USB Audio Class 2 Device'. This name will be overwritten with a USB Product string, if it is available.
The driver is automatically enabled when a compatible device is attached to the system. However, if a third-party driver exists on the system or Windows Update, that driver will be installed and override the class driver.
Architecture
usbaudio2.sys fits within the wider architecture of Windows USB Audio as shown.
Related USB specifications
The following USB specifications define USB Audio and are referenced in this topic.
- USB-2 refers to the Universal Serial Bus Specification, Revision 2.0
- ADC-2 refers to the USB Device Class Definition for Audio Devices, Release 2.0.
- FMT-2 refers to the Audio Data Formats specification, Release 2.0.
The USB-IF is a special interest group that maintains the Official USB Specification, test specifications and tools.
Audio formats
The driver supports the formats listed below. An alternate setting which specifies another format defined in FMT-2, or an unknown format, will be ignored.
Type I formats (FMT-2 2.3.1):
- PCM Format with 8..32 bits per sample (FMT-2 2.3.1.7.1)
- PCM8 Format (FMT-2 2.3.1.7.2)
- IEEE_FLOAT Format (FMT-2 2.3.1.7.3)
Type III formats (FMT-2 2.3.3 and A.2.3):
- IEC61937_AC-3
- IEC61937_MPEG-2_AAC_ADTS
- IEC61937_DTS-I
- IEC61937_DTS-II
- IEC61937_DTS-III
- TYPE_III_WMA
Feature descriptions
This section describes the features of the USB Audio 2.0 driver.
Audio function topology
The driver supports all entity types defined in ADC-2 3.13.
Each Terminal Entity must have a valid clock connection in compatible USB Audio 2.0 hardware. The clock path may optionally include Clock Multiplier and Clock Selector units and must end in a Clock Source Entity.
The driver supports one single clock source only. If a device implements multiple clock source entities and a clock selector, then the driver will use the clock source that is selected by default and will not modify the clock selector’s position.
A Processing Unit (ADC-2 3.13.9) with more than one input pin is not supported.
An Extension Unit (ADC-2 3.13.10) with more than one input pin is not supported.
Cyclic paths in the topology are not allowed.
Audio streaming
The driver supports the following endpoint synchronization types (USB-2 5.12.4.1):
- Asynchronous IN and OUT
- Synchronous IN and OUT
- Adaptive IN and OUT
For the asynchronous OUT case the driver supports explicit feedback only. A feedback endpoint must be implemented in the respective alternate setting of the AS interface. The driver does not support implicit feedback.
There is currently limited support for devices using a shared clock for multiple endpoints.
For the Adaptive IN case the driver does not support a feedforward endpoint. If such an endpoint is present in the alternate setting, it will be ignored. The driver handles the Adaptive IN stream in the same way as an Asynchronous IN stream.
The size of isochronous packets created by the device must be within the limits specified in FMT-2.0 section 2.3.1.1. This means that the deviation of actual packet size from nominal size must not exceed +/- one audio slot (audio slot = channel count samples).
Descriptors
An audio function must implement exactly one AudioControl Interface Descriptor (ADC-2 4.7) and one or more AudioStreaming Interface Descriptors (ADC-2 4.9). A function with an audio control interface but no streaming interface is not supported.
The driver supports all descriptor types defined in ADC-2, section 4. The following subsections provide comments on some specific descriptor types.
Class-Specific AS interface descriptor
For details on this specification, refer to ADC-2 4.9.2.
An AS interface descriptor must start with alternate setting zero with no endpoint (no bandwidth consumption) and further alternate settings must be specified in ascending order in compatible USB Audio 2.0 hardware.
An alternate setting with a format that is not supported by the driver will be ignored.
Each non-zero alternate setting must specify an isochronous data endpoint, and optionally a feedback endpoint. A non-zero alternate setting without any endpoint is not supported.
The bTerminalLink field must refer to a Terminal Entity in the topology and its value must be identical in all alternate settings of an AS interface.
The bFormatType field in the AS interface descriptor must be identical to bFormatType specified in the Format Type Descriptor (FMT-2 2.3.1.6).
For Type I formats, exactly one bit must be set to one in the bmFormats field of the AS interface descriptor. Otherwise, the format will be ignored by the driver.
To save bus bandwidth, one AS interface can implement multiple alternate settings with the same format (in terms of bNrChannels and AS Format Type Descriptor) but different wMaxPacketSize values in the isochronous data endpoint descriptor. For a given sample rate, the driver selects the alternate setting with the smallest wMaxPacketSize that can fulfill the data rate requirements.
Type I format type descriptor
For details on this specification, refer to FMT-2 2.3.1.6.
The following restrictions apply:
Format | Subslot size | Bit resolution |
---|---|---|
Type I PCM format: | 1 <= bSubslotSize <= 4 | 8 <= bBitResolution <= 32 |
Type I PCM8 format: | bSubslotSize 1 | bBitResolution 8 |
Type I IEEE_FLOAT format: | bSubslotSize 4 | bBitResolution 32 |
Type III IEC61937 formats: | bSubslotSize 2 | bBitResolution 16 |
Class-Specific AS isochronous audio data endpoint descriptor
For details on this specification, refer to ADC-2 4.10.1.2.
The MaxPacketsOnly flag in the bmAttributes field is not supported and will be ignored.
The fields bmControls, bLockDelayUnits and wLockDelay will be ignored.
Class requests and interrupt data messages
The driver supports a subset of the control requests defined in ADC-2, section 5.2, and supports interrupt data messages (ADC-2 6.1) for some controls. The following table shows the subset that is implemented in the driver.
Entity | Control | GET CUR | SET CUR | GET RANGE | INTERRUPT |
---|---|---|---|---|---|
Clock Source | Sampling Frequency Control | x | x | x | |
Clock Selector | Clock Selector Control | x | |||
Clock Multiplier | Numerator Control | x | |||
Denominator Control | x | ||||
Terminal | Connector Control | x | x | ||
Mixer Unit | Mixer Control | x | x | x | |
Selector Unit | Selector Control | x | x | ||
Feature Unit | Mute Control | x | x | x | |
Volume Control | x | x | x | x | |
Automatic Gain Control | x | x | |||
Effect Unit | – | ||||
Processing Unit | – | ||||
Extension Unit | – |
Additional information on the controls and requests is available in the following subsections.
Clock source entity
For details on this specification, refer to ADC-2 5.2.5.1.
At a minimum, a Clock Source Entity must implement Sampling Frequency Control GET RANGE and GET CUR requests (ADC-2 5.2.5.1.1) in compatible USB Audio 2.0 hardware.
The Sampling Frequency Control GET RANGE request returns a list of subranges (ADC-2 5.2.1). Each subrange describes a discrete frequency, or a frequency range. A discrete sampling frequency must be expressed by setting MIN and MAX fields to the respective frequency and RES to zero. Individual subranges must not overlap. If a subrange overlaps a previous one, it will be ignored by the driver.
A Clock Source Entity which implements one single fixed frequency only does not need to implement Sampling Frequency Control SET CUR. It implements GET CUR which returns the fixed frequency, and it implements GET RANGE which reports one single discrete frequency.
Clock selector entity
For details on this specification, refer to ADC-2 5.2.5.2
The USB Audio 2.0 driver does not support clock selection. The driver uses the Clock Source Entity which is selected by default and never issues a Clock Selector Control SET CUR request. The Clock Selector Control GET CUR request (ADC-2 5.2.5.2.1) must be implemented in compatible USB Audio 2.0 hardware.
Feature unit
For details on this specification, refer to ADC-2 5.2.5.7.
The driver supports one single volume range only. If the Volume Control GET RANGE request returns more than one range, then subsequent ranges will be ignored.
The volume interval expressed by the MIN and MAX fields should be an integer multiple of the step size specified in the RES field.
If a feature unit implements single channel controls as well as a master control for Mute or Volume, then the driver uses the single channel controls and ignores the master control.
Additional Information for OEM and IHVs
OEMs and IHVs should test their existing and new devices against the supplied in-box driver.
There is not any specific partner customization that is associated with the in-box USB Audio 2.0 driver.
This INF file entry (provided in a update to Windows Release 1703), is used to identify that the in-box driver is a generic device driver.
The in-box driver registers for the following compatible IDs with usbaudio2.inf.
See the USB audio 2.0 specification for subclass types.
USB Audio 2.0 Devices with MIDI (subclass 0x03 above) will enumerate the MIDI function as a separate multi-function device with usbaudio.sys (USB Audio 1.0 driver) loaded.
The USB Audio 1.0 class driver registers this compatible ID with wdma_usb.inf.
And has these exclusions:
An arbitrary number of channels (greater than eight) are not supported in shared mode due to a limitation of the Windows audio stack.
IHV USB Audio 2.0 drivers and updates
For IHV provided third party driver USB Audio 2.0 drivers, those drivers will continue to be preferred for their devices over our in-box driver unless they update their driver to explicitly override this behavior and use the in-box driver.
Audio Jack Registry Descriptions
Starting in Windows 10 release 1703, IHVs that create USB Audio Class 2.0 devices having one or more jacks have the capability to describe these jacks to the in-box Audio Class 2.0 driver. The in-box driver uses the supplied jack information when handling the KSPROPERTY_JACK_DESCRIPTION for this device.
Jack information is stored in the registry in the device instance key (HW key).
The following describes the audio jack information settings in the registry:
<tid> = terminal ID (As defined in the descriptor)
<n> = Jack number (1 ~ n).
Convention for <tid> and <n> is:
- Base 10 (8, 9, 10 rather than 8, 9, a)
- No leading zeros
- n is 1-based (first jack is jack 1 rather than jack 0)
For example:
T1_NrJacks, T1_J2_ChannelMapping, T1_J2_ConnectorType
For additional audio jack information, see KSJACK_DESCRIPTION structure.
These registry values can be set in various ways:
By using custom INFs which wrap the in-box INF for the purpose to set these values.
Directly by the h/w device via a Microsoft OS Descriptors for USB devices (see example below). For more information about creating these descriptors, see Microsoft OS Descriptors for USB Devices.
Microsoft OS Descriptors for USB Example
The following Microsoft OS Descriptors for USB example contains the channel mapping and color for one jack. The example is for a non-composite device with single feature descriptor.
The IHV vendor should extend it to contain any other information for the jack description.
Troubleshooting
If the driver does not start, the system event log should be checked. The driver logs events which indicate the reason for the failure. Similarly, audio logs can be manually collected following the steps described in this blog entry. If the failure may indicate a driver problem, please report it using the Feedback Hub described below, and include the logs.
Hp Usb Composite Device Driver
For information on how to read logs for the USB Audio 2.0 class driver using supplemental TMF files, see this blog entry. For general information on working with TMF files, see Displaying a Trace Log with a TMF File.
For information on 'Audio services not responding' error and USB audio device does not work in Windows 10 version 1703 see, USB Audio Not Playing
Feedback Hub
If you run into a problem with this driver, collect audio logs and then follow steps outlined in this blog entry to bring it to our attention via the Feedback Hub.
Driver development
This USB Audio 2.0 class driver was developed by Thesycon and is supported by Microsoft.
See also
Hi, you to get all HP Smartphone USB drivers with an easy installation guide. HP USB driver is an important part of all HP Smartphones which enable you to easily connect your HP android device with the PC or laptop.
What is a HP USB Driver?
Hp Usb Drive Driver
HP USB Driver is an important part for all android devices which allows you to easily connect any android device or tablet through the personal computer or laptop. In other words, it is a group of more than one files or program which create a bridge between the android devices and the personal computer to communicate and sharing the files between each other. After properly connecting your android device or tablet with the personal computer via USB driver then, you will be able to do many more important things.
Hp V220w Usb Device Driver Download
With the help of PC Suit, or any other software and installing the ROM will be you will be able to easily transfer your important & confidential data like photos, audio, video, messages, mp3, contacts, download, install & update stock ROM of any android device, update all drivers of your android devices, update your android device, take backup whole android device, and if you lost all important data from your android device then you can easily restore with the help of backup via HP USB drivers on your computer.
Must Read: How to increase internal memory of Android smartphone
What is HP ADB Driver?
ADB stand for Android Debug Bridge. HP ADB driver is a client server program which is used to create the bridge between the developer and android device apart of that also create a bride between the personal computer and android device for android application development. With the help of HP ADB driver you will be able to give direct command through any terminal which allows you to modify and update your android device or device software by giving the command through PC command line. It is used to properly manage your Android device.
Hp Usb Device Driver Download
Download latest HP USB driver here is list:
HP Model No. | Driver Download link |
---|---|
HP 7 G2 Driver | Download |
HP 7 Plus Driver | Download |
HP 7 VoiceTab Driver | Download |
HP 8 Driver | Download |
HP 10 Plus Driver | Download |
HP Elite X3 Driver | Download |
HP pro Slate 8 Driver | Download |
HP pro Slate 10 EE G1 Driver | Download |
HP Pro Slate 12 Driver | Download |
HP Slate 6 VoiceTab Driver | Download |
HP Slate 6 VoiceTab II Driver | Download |
HP Slate 7 Driver | Download |
HP Slate 7 Plus Driver | Download |
HP Slate 7 Extreme Driver | Download |
HP Slate 7 VoiceTab Driver | Download |
HP Slate 8 Pro Driver | Download |
HP Slate 10 HD Driver | Download |
HP Slate 17 Driver | Download |
HP SlateBook X2 Driver | Download |
How to install HP USB and ADB driver?
There are two ways from which you can easily download HP USB driver on your personal computer or laptop through the Exe file or by Driver file (Manually) method.
Method 1: How to install HP USB and ADB driver via Exe file:
Download and extract the zip file on your computer and connect your phone, then double click on this file to run that exe file now click on the Next > Next > Finish button. It is very simple process, there is no need to add extra efforts.
Method 2: How to install HP USB driver via driver files (Manually):
These driver files don’t have any kind of executable files so, you must need to install HP USB drivers using manual method. The installation process of HP USB driver via driver files is given below, follow all steps carefully:
Step 1: Download and extract the zip file on your computer then connect your android smartphone via HP USB cable to your personal computer or laptop.
Hp Usb Device Driver
Step 2: Click on the Start button or you can also press WIN key to directly active start menu then either you have to right click on the “Computer” option or you can also press Shift+F10 key to open the cascading menu and choose “Manage” option. Click on the “Device Manager” option in the Computer Management dialog box. Now you can see your mobile name or number with yellow triangle icon in the right side pan. That means android device is properly not installed on your computer or laptop.
Step 3: Press right mouse button which has yellow triangle option then you have to click on Update Driver Software option > Click on the “Browse my computer for driver software” option > Select the folder by clicking on the Browse… button now, you will get complete path of USB driver software file then click on the Next button > Now, your USB driver updating process will be start. After successfully finish the USB driver updating process, finally click on the close button.
Must Read: Swap internal storage with the SD card in Android Lollipop and KitKat
Hp Usb Device Drivers
I hope you will get required USB driver of HP Smartphone and also helps you to easily install HP USB driver on your PC or laptop. If you have any query or need USB drivers of any other Smartphone then write us in the comment box. Thanks to all.